A protective gaming-console enclosure designed around airflow and particulate control. A rigid base and top plate are separated by standoffs, with a breathable filtering shroud around the perimeter.

Can it stay around the console while I play?

Yes — that's the point of the design. Dust Shield is specifically being designed for protection during operation, standby and downtime, rather than only when the console is off.

How does air get through?

A breathable filtering member surrounds the enclosure, and the spacing created by the standoffs provides an internal air volume around the console rather than wrapping against its vents.

What does it help protect against?

Primarily dust, lint, fibers, hair and other airborne particulate. It also adds another physical layer between your console and everyday household activity.

No. Dust Shield makes no waterproof or water-resistance claim. It is being developed as a particulate-management and physical protective enclosure.

What consoles will it support?

Current-generation home gaming consoles — final compatibility list to be confirmed. Initial development focus is on current-generation home gaming consoles; specific compatibility will be published once the product team confirms it.

To be announced with the Kickstarter campaign.

Final Kickstarter pricing will be announced before launch.

Intellectual property protection in progress. Dust Shield is built around a proprietary enclosure design.

Can I clean or replace the shroud?

Final care and replacement instructions will be published with the production product.

Coming soon to Kickstarter

Protect your console.
While you play.

A protective enclosure engineered around airflow and particulate control — designed to help keep dust, lint and airborne debris away from the console you invested in.

Explore the designIntellectual property protection in progress

Loading product model

Drag to explore

Interactive concept model built from the Dust Shield design drawings.

The problem

Your console breathes the same air your room does.

Gaming consoles move air to control temperature. That air can carry dust, lint, hair, fibers and other airborne particulate. Over time, accumulation around fans, vents and heat-management components can interfere with airflow and contribute to thermal-management problems.

01
Dust buildup
Particulate can accumulate around vents, fans and heat-management surfaces.
02
Airflow restriction
Accumulation may interfere with how effectively air moves through the system.
03
More maintenance
Internal buildup can mean more frequent cleaning and maintenance.
04
Expensive hardware
Modern consoles represent a significant investment worth protecting.

The difference

Most covers work when your console stops.
Dust Shield is being designed for when it doesn't.

Comparison of a traditional dust cover and the Dust Shield design intent
	Traditional dust cover	Dust Shield
Console off	Yes	Yes
Standby / rest mode	Typically removed	Design intent
During gameplay	Typically removed	Design intent
Breathable filtering enclosure	No	Yes
Spacing around the console	No — wraps the shell	Yes

Comparison describes design intent for the Dust Shield enclosure. It is not a certification or a tested performance claim.

Full-time protection

Play. Rest. Off.

How it works

A simple idea. Engineered differently.

01
Position
Place the console on the base plate. Retention features help hold it in a stable position.
02
Enclose
The top plate and standoff tubes establish protective spacing around the console.
03
Filter
The breathable shroud spans the enclosure perimeter to help inhibit airborne particulate.
04
Play
Route power, video and accessory cables through the opening and keep playing.

Interactive product explorer

Engineered around the console.

Rotate the model, pull it apart and see how airflow moves through the enclosure. This is a concept model built from the Dust Shield design drawings.

Loading product model

The assembled Dust Shield enclosure with a generic console shown for scale.

Exploded component view

Nine parts, one enclosure.

Switch the model to Exploded view to see the assembly separate. Each labelled element below maps to a part of the design.

Top plate
Filtering member
Elastic retention
Standoffs
Cable access
Console position
Retention members
Base plate
Structural support

Development

The road to Dust Shield.

Working drawings from the Dust Shield design process — the same documentation the enclosure is being engineered from.

Enclosure architecture
Assembled concept
Filtering concept
Base plate development
Console stabilization

Manufacturing & roadmap

Designed to become a real product.

Dust Shield LLC is moving from working prototypes toward a manufacturable consumer product. Current direction includes injection-molded rigid components, production tooling, a breathable textile shroud, continued prototype refinement, supplier evaluation and manufacturability work.

Prototype
Design refinement
Tooling
Production
Quality check
Fulfillment

From homemade solution to a product built for gamers everywhere.

01
The problem
Years of dealing with dusty, hot gaming systems at home.
02
The first shield
An early homemade solution was created about seven years ago.
03
Real-world use
Versions were made for, and used by, friends and family.
04
Product development
The concept evolved into a structured enclosure design.
05
Engineering & IP
Formal design documentation and intellectual-property work began.
06
Prototyping
3D models, manufacturing methods and material options are being refined.
07
Kickstarter
A community-backed production launch.
08
Tooling & manufacturing
Move toward production tooling and manufacturing.
09
Fulfillment
Deliver Dust Shield to early supporters.

Timeline shows development stages, not committed dates. Production, tooling and delivery timing will be announced with the Kickstarter campaign.

Our story

This started in a house full of gamers.

Dust Shield wasn't dreamed up as another accessory to put on a shelf. Geoffrey and Janet Williams spent years raising four boys in a home where gaming systems were always running.

Dust, heat and console maintenance were recurring problems. Friends, family and neighborhood parents ran into the same frustration — and their house became the place people brought consoles that had stopped behaving.

About seven years ago, that frustration led to the first homemade Dust Shield. More were made for friends and family, and they kept working.

Now Dust Shield LLC is working to turn that original idea into a professionally manufactured product.

Founded by: Geoffrey & Janet Williams
First shield built: About 7 years ago
Built for: Gamers who keep their systems running

Hand-drawn Dust Shield design drawing showing the full enclosure assembly — The original design work behind Dust Shield — drawn by the founders, not a studio.

Kickstarter pre-launch

Be there when Dust Shield goes live.

We're preparing Dust Shield for Kickstarter. Join the early-access list for development updates, launch information and the opportunity to become one of our first backers.

Partners

Interested in more than one?

Dust Shield LLC is also speaking with manufacturing, retail, distribution and investment partners as we prepare for launch.

FAQ

Questions, answered honestly.

Where something hasn't been finalized yet, we say so rather than guessing.

What is Dust Shield?
A protective gaming-console enclosure designed around airflow and particulate control. A rigid base and top plate are separated by standoffs, with a breathable filtering shroud around the perimeter.
Can it stay around the console while I play?
Yes — that's the point of the design. Dust Shield is specifically being designed for protection during operation, standby and downtime, rather than only when the console is off.
How does air get through?
A breathable filtering member surrounds the enclosure, and the spacing created by the standoffs provides an internal air volume around the console rather than wrapping against its vents.
What does it help protect against?
Primarily dust, lint, fibers, hair and other airborne particulate. It also adds another physical layer between your console and everyday household activity.
Is it waterproof?
No. Dust Shield makes no waterproof or water-resistance claim. It is being developed as a particulate-management and physical protective enclosure.
What consoles will it support?
Current-generation home gaming consoles — final compatibility list to be confirmed. Initial development focus is on current-generation home gaming consoles; specific compatibility will be published once the product team confirms it.
When will it ship?
To be announced with the Kickstarter campaign.
What will it cost?
Final Kickstarter pricing will be announced before launch.
Is it patented?
Intellectual property protection in progress. Dust Shield is built around a proprietary enclosure design.
Can I clean or replace the shroud?
Final care and replacement instructions will be published with the production product.

Protect the console.
Keep playing.

Join Dust Shield before we launch on Kickstarter.

Product development updates. Kickstarter launch information. No spam.

Protect your console.While you play.

Your console breathes the same air your room does.

Dust buildup

Airflow restriction

More maintenance

Expensive hardware

Most covers work when your console stops.Dust Shield is being designed for when it doesn't.

Play. Rest. Off.

A simple idea. Engineered differently.

Position

Enclose

Filter

Play

Engineered around the console.

Nine parts, one enclosure.

The road to Dust Shield.

Designed to become a real product.

From homemade solution to a product built for gamers everywhere.

The problem

The first shield

Real-world use

Product development

Engineering & IP

Prototyping

Kickstarter

Tooling & manufacturing

Fulfillment